1. Remove the cabinet panels.
NOTE:
When re-installing the panels, be sure that the screws engage the TOP
panel.
2. Remove the ice deflector, ice chute, and drain pan. Drain tube assembly is
packed with the drain pan as shown below.
3. Install gasketing on top of bin if required.
4.
CAREFULLY
place the cuber onto the gasketed bin.
5. Install the drain pan, ice chute, and ice deflector. Route the ice maker drain
tube assembly through the rear of the bin, and clamp the tubing to the drain pan
nipple.
6. Electrical, water and drain locations are shown on the following drawing:
508101302
Rev: 10-5-98
- 3 -
CAUTION:
RISK OF PERSONAL INJURY OR EQUIPMENT DAMAGE
.
Use a suitable lifting means and be careful of sharp edges.
Содержание CLASSIC GB457
Страница 10: ...508101302 Rev 10 5 98 10...
Страница 11: ...508101302 Rev 10 5 98 11...
