2
S45J-A-R3 2/03
Step 1.
Release locking latch.
(Figure A).
Step 2.
Unfold as shown. Make
sure both locks snap into place.
(Figure B).
How to Assemble Your Stroller
Step 1.
Remove and discard
protective plastic sleeve from ends of
rear axle assembly.
Step 2.
Position rear axle
assembly as shown (Figure A), with
brake levers pointing towards stroller
handle.
Step 3.
Push both brake assem-
blies onto rear leg tubes at the same
time until spring loaded buttons click
into place (Figure B).
Step 4.
Lay stroller on its side.
Slide wheel onto axle. (Figure C).
Step 5.
Push down on wheel until
you hear a click. Pull up on wheel
to make sure it is properly
secured. If wheel pulls off, push
wheel onto axle again but push metal
clip in at the same time. Make sure
wheel is secure (Figure D).
Step 6.
Repeat for second side.
To Remove Wheel.
Press
metal clip in and pull wheel off.
NOTE:
Keep wheels at a recommended
tire pressure of 35 p.s.i. (241 kPa).
B
A
C
1
TO OPEN STROLLER:
2
TO ASSEMBLE REAR TIRES:
D
A
B
