6
To Assemble Rear Wheels
Position brake assembly as shown, with
brake levers pointing towards stroller
handle.
Push both sides of brake assembly onto
rear leg tubes at the same time until
spring loaded buttons click into place.
Lay stroller on its side.
Slide a rear wheel onto the axle than
slide a washer onto the axle.
Fit straight part of cotter pin through
hole on axle as shown.
Line up each of the tabs in the hub cap
with the slots in the wheel, snap hub cap
into place.
Repeat for second side.
2
3
1
1
4
5
6
2
4
5
7