7. 7. The distance between the brake pads and the rim can be
changed by slightly loosening the brake cable clamp screw and
slightly reducing or increasing the tension of the cable.
Then tighten the brake cable clamp screw again! Wear
of the brake pads may necessitate a readjustment of
the brake. Small adjustments can be done by using the
brake adjustment screw on the brake lever.
6. The brake lever/handlebar distance can be adjusted to the
child‘s reach with the brake lever adjustment screw.
Afterwards
the correct distance of the brake pad to the rim may have to
be reset! They should be as close as possible to the rim, but
not touch until the lever is pulled.
The left brake handle is assigned to the front brake, the right to the
rear brake!
Center the rim and close the quick release lever so that it is parallel
to the left fork.
Important: The quick-release lever must be very dif
-
ficult to swing into the closed position! Press the quick
release lever into position with the ball of your thumb
while you wrap your fingers around the back of the fork!
If the quick release lever can be turned in the closed position,
the clamping force is not sufficient. The bike could come loo
-
se during the ride! Open the quick-release lever again and pull
the clamping nut a little tighter. Then close the quick release
lever as described above! Do not forget to reinsert the brake
cable guide tube and check the brakes!
5. To install the front wheel, the front brake must be released. By
squeezing the two brake arms and pulling gently on the brake
cable guide tube, the brake cable can be unhooked.
Now insert the wheel into the fork so that the axle ends to the right
and left of the hub body are correctly seated in the ends. Remove
the tension nut and a spring from the quick release axle. Now
insert the quick-release axle from the left side through the hollow
axle of the wheel hub.
Then push the second spring onto the quick-release axle.
Pull the quick release clamp open.
Tighten the quick release nut until it touches the dropout.
Brake cable
guide tubes
Brake Arm
Brake lever
adjustment screw
Brake
adjustment screw
Brake cable
clamp screw
