1
Handling and Safety Precautions
These precautions should be strictly observed in order to ensure safe, long-term
use of the product.
Precautions when using the product
1. The KOKEN ”Western Features” Baby is made of a special silicone rubber, in order to
reproduce the same feel as touching a real baby. It should be handled with the same
gentle touch that you would use when handling a real baby.
2. Pushing or pulling the model with excessive force will permanently damage it. The use of
sharp instruments, nails, etc. could damage the model.
3. If the surface feels oily, apply baby powder or a similar substance.
4. Never use oil-based inks, paints or other substances on the model.
5. To clean the skin, use a neutral solvent, and apply powder after drying it.
NOTE: Do not use thinners, benzene or similar solvents.
Storing the KOKEN ”Western Features” Baby
1. Apply powder over the entire surface of the KOKEN ”Western Features” Baby, and store it
in the bag provided as an accessory.
2. Make sure the KOKEN ”Western Features” Baby is positioned in the correct orientation for
storage. Storing it in the opposite orientation could deform the model.
3. Store the KOKEN ”Western Features” Baby in a location away from direct sunlight or
ultraviolet rays.
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of
this instruction manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.
