-3-
380mm
Attachment
Bolt (x2)
Wall Plug
550mm
Waste
Outlet
Waste
630mm
805mm
80mm
·
·
Install the faucet and drain to the lavatory according to the
manufacture's instructions.
·
·
·
·
·
Carefully place the lavatory against the wall, so the
hanger bolts extend through the lavatory holes.
·
·
·
Level the lavatory.
Install the cap nuts and washers, and tighten until snug.
Do not
overtighten the cap nuts.Overtightening may cause
damage to the product.
Clean the lavatory top.
CAUTION: Risk of product damage.
·
·
Put the sealant around the back wall attached surface of
the lav evenly.
Fig.#3
3
Apply Silicone sealant
along this face
Washer
Nut
Offset Nut
Fig.#4
4
URBANITY 800mm Vanity
K-15095T
800mm
K-15095T
1130444-T01-A
