113351-2-
AB
TOUCHLESS
BATTERY
URINAL FLUSH VALVE
K-13686
1. BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
These instructions contain important information on the
Touchless battery urinal flush valve which is designed to
work in place of an existing manual flush valve. No addi-
tional plumbing or electrical connections are required to
install the valve.
2. INSTALLATION SEQUENCE
Remove cover from water supply valve. Using a screw-
driver, turn the screw clockwise to close valve.
Activate flush lever to drain water from flush valve assem-
bly.
Loosen inlet and outlet nuts and remove manual flush
valve assembly.
Flush Lever
Loosen Nuts
to Remove
Existing Valve
Turn Clockwise
to Close Valve
Cover
Water Supply
Valve
Flush Valve
Vacuum Breaker
Clean threads on water supply valve. Install by inserting
flush valve inlet fitting into water supply valve, and then lin-
ing up outlet fitting with vacuum breaker unit. Tighten inlet
and outlet connections securely.
NOTE: Make sure O-ring is on inlet fitting.
Inlet
O-Ring
Outlet
Water
Supply
Valve
