All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time without
notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. Do not remove the plaster guard from the valve body until instructed to.
3. Install valve 880A (or 98309A-CP for NZ) according to the rough-in dimensions of 37336A-4. Install valve
882A (or 98310A-CP for NZ) according to the rough-in dimensions of 37335A-4. For additional valve
installation instructions refer to the 40mm valve install guide (1071635-AN2-A).
4. All installations should comply with the relevant requirements of AS/NZS 3500.
5. 37335A-4 and 37336A-4 are trim only. The mixing valve is sold separately.
1154953-AN2-A 15/10/12
Bath / Shower mixer with diverter: 37335A-4
Bath / Shower mixer without diverter: 37336A-4
BEFORE YOU BEGIN
INSTALLATION INSTRUCTIONS
ROUGH-IN DIMENSIONS
Wall Mount Single Lever Mixers
STRAYT
SHOWER / BATH TAPWARE
1
37335A-4
37336A-4
54
166
32~42
or 40~49
or 40~49
65
Finished Wall
135
83
110
54
166
Finished Wall
135
83
110
32~42
Rc 1/2” inlet
& outlet ports
Rc 1/2” inlet
& outlet ports
