No change in measurements if connected
with drain illustrated. (K-7166-AF)
Blower Access
20" (508 mm) W x
15" (381 mm) H
3-1/4"
(83 mm)
11"
(279 mm)
21-1/8"
(537 mm)
3-5/8"
(92 mm)
2-7/8"
(73 mm)
3"
(76 mm)
1-1/2" Bath Drain
1" (25 mm)
1-1/4"
(32 mm)
21"
(533 mm)
60" (1524 mm)
42-1/4" (1073 mm)
Lumbar
Angle 14°
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 Hz
Blower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-in
Installation:
End
Drain location:
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
42" x 28" (1067 mm x 711 mm)
Basin area, bottom:
55" x 40" (1397 mm x 1016 mm)
Basin area, top:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
87 lbs (39.5 kg)
Weight:
41 lbs/ft² (200.2 kg/m²)
Minimum floor load:
15-1/2" (394 mm)
Water depth:
73 gal (276.3 L)
Water capacity:
Drop-in, 1017044-7, required, included
Template:
Blower: 120 V, 10 A, 60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
2-10-2020 07:48 - US
Serif
®
5' BubbleMassage
™
Bath
K-1337-G
