Fig.#14
14
-6-
FILL VALVE ADJUSTMENT
Fill float with ballast
Adjust the cam clockwise or counter-
clockwise until the water level is at the
marked water line.
Test flush the toilet.
Check all connections for leakage for
several days.
Set the tank cover in place on the tank.
PUSH BUTTON INSTALLATION
NOTE:
Remove the package and screw out the nut. Make the
button through the tank cover as shown. Be noted that the
button shall be kept level. Arrange big and small flush buttons
according to the label of water consumption on the tank.
Tighten the nut from beneath the tank cover.
Fig.#15
15
Fig.#13
13
Install the tank lid and the seat.
Tighten the seat power line and pipe
with mounting twist tie.
Periodically check for leaks for several
days following the installation.
K
K
1391134-T01-A
