1. Install the Spout
IMPORTANT!
Use care when installing the spout to avoid
scratching the finish.
Remove the plaster guard and save the three screws for future
use.
Remove and discard the thread protector.
Thread the spout into the outlet port.
Secure the flange to the wall with the screws (wrench supplied)
that were removed from the plaster guard.
Confirm that the O-ring is in the notch in the interior of the spout
escutcheon.
Apply plumbers putty or other sealant to the back surface of the
spout escutcheon according to the putty manufacturer’s
instructions.
Press the escutcheon firmly against the wall.
Install the Sensor Cover
Flange
Screws
Faucet Outlet Port
Plaster Guard
Discard the thread protector.
O-Ring
Escutcheon
Spout
Setscrew
Apply plumbers putty or sealant.
Sensor Cover
Kohler Co.
3
1405439-2-A
