1
ROUGHING-IN & DIMENSIONS
• Please read these instructions carefully to familiarise
yourself with the required tools, materials, and
installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
• All information is based on the latest product
information available at the time of publication.
Kohler NZ Ltd. reserves the right to make changes in
product characteristics, packaging, or availability at
any time without notice.
• These instructions contain important care, cleaning,
and warranty information-
�������������������
������������������������������
A. BUBBLE MASSAGE BATH
Ordering Information
REGATTA drop in
B. Required Electrical Service
Dedicated branch circuit required, protected with Class
A Ground-Fault Circuit-Interrupt (GFCI):
Blower
220~240V, 10.A, 50Hz
C. Installation
Read the entire installation instructions before beginning
the installation.
BEFORE YOU BEGIN
BUBBLE MASSAGE BATH
INSTALLATION INSTRUCTIONS
1128227-A01-D Date: 13/8/2010
Blower
Heater Voltage
Freq
Amperage
Motor
Part #
Kohler AP300 - air switch
300 W
180W 220~240 V 50-60Hz 2.2A
1128A-CP
Product
Air switch
11303A-GAB-0
EVOK RECT drop in
EVOK RECT freestanding
EVOK OVAL drop in
18344A-GAB-0
18263A-GAB-0
18346A-GAB-0
EVOK OVAL freestanding
18348A-GAB-0
1709A-GAB-0
ESCALE drop-In
ESCALE free Standing
11343A-GAB-0
11344A-GAB-0
OVE RECT drop in
D. Dimensions
Detached blowers are supplied with a 1.5m flexible coupling. This allows the blower to be positioned at the installers
discretion. For serviceability of the blower, an access panel of 450mm x 400mm must be fitted. If access to the
blower is not provided, then no warranty service will be provided.
If supply cord or interconnection cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
