Kohler OPIAZ, Инструкция по установке и эксплуатации

Страница: 3 / 12

Kohler Co.
3 1102602-A2-D
Installation
2
Define the position of connector: Place the connector onto the pan, position
between outlet and waste pipe.
1
Remove the existing toilet: Turn off the water supply and flush the toilet, then
sponge out all remaining water from the cistern. Disconnect the supply shut-off
valve (if present), and remove the old pan and cistern.
CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately,
temporarity stuff a rag in the closet flange.
3
Position the template on the floor. Mark the positions of the floor fixing kit holes.
Waste Pipe
Waste Pipe
A
B
Connector to Wall Connector to Wall
Wall
Wall
Case 1 Case 2
Finished
Wall
Finished
Wall
Pan
Connector
Waste Pipe
Connector
Waste Pipe
Connector
X
Pan
X
Case 3
Finished
Wall
Connector
Waste Pipe
Connector
Pan
X
Offset Pan Collar
X = Set out as per spec sheet