-5-
5
Apply weight evenly.
Do not move after placement!
Watertight seal may be broken!
7
Cut excess.
6
Do not
overtighten.
Install floor mounting kit as shown in the figure.
8
Fix bolt cap.
This side up.
6 mm
Max
6mm
Cut excess.
6 mm
Max
6mm
9
Install the tank
Install the bolts into the bracket and tighten evenly.
Mounting Bracket tabs must contact vitreous for proper
gasket compression.
Do not overtighten!
10
Connect supply and turn on the water.
10mm Supply Alimentation
10mm
1191811-T01-A