background image

8

1232447-W2-A

Installation of the Shower Fittings

1.

  Slide the hose retaining ring and the clamp bracket onto the middle bar, and then screw 

the middle and lower bar sections together.

2.

  Screw the riser arm to the middle and lower bar section.

3.

  Push the riser bar into the top of the bar valve.

 Note! 

The riser bar must be located correctly, push down firmly to seat it.

4.

  Insert the wall fixing bracket into the riser arm mounting boss, then swivel the bar if 

necessary to reposition the wall fixing bracket against the wall.

 

Note!

 The grubscrew mounting hole must be positioned at the top.

5.

  Mark the holes for the wall fixing bracket.

 

Note!

 Use a spirit level to ensure the bar is vertical.

6.

  Remove the wall fixing bracket from the mounting boss then remove the riser bar from 

the bar valve.

7.

  Drill two holes to suit the wall fixings, ensuring that the bar valve is protected from debris. 

Fix the bracket to the wall.

8.

  Refit the riser bar into the bar valve and then put the concealing cover onto the riser arm 

mounting boss.

9.

  Push the riser arm mounting boss onto the wall fixing bracket.

10.

  Fit and tighten the grubscrew (2.5 mm hexagonal key) into the hole on top of the mounting 

boss then push the concealing cover over the wall fixing bracket.

11.

  Tighten the grubscrew at the valve end and fit the grubscrew cover.

12.

  Screw the fixed shower head onto the riser arm. Make sure that the washer is fitted.

 

Note!

 The Moxie wireless speaker does not have to be fitted at this stage.

13.

  Fit the shower hose onto the bottom outlet of the bar valve.

 

Note! 

The shower hose has slightly different sized conical connections at each end (the 

smaller diameter / longer length conical is identified with a 

Red

 protective cover or a 

White

 label). The end with the red cover or white label connects to the showerhead, the 

clear end connects to the valve.

14.

  Push the shower hose through the retaining ring and screw it to the showerhead.

15.

  Place the showerhead into the clamp bracket, adjusting the angle and height to the users 

preference.

Содержание Mira Atom ERD

















Отзывы: