4
INSTALLATION
General
Installations must comply with Water Regulations (Bye-Laws, Scotland), and any other
Local Regulations and Building Regulations in force at the time of installation.
Before installation carefully inspect the product for any signs of damage.
A hose retaining ring must be used to stop the showerhead from dropping below the
spill-over level of the bath or shower tray. This
will prevent water supply contamination due to
backsiphonage.
Do not fit any form of flow control in the shower
outlet.
Do not use excessive force when making
connections.
When installing the shower fitting it must be fitted
over a water catchment area and be positioned
so that it discharges down the centre line of the
bath, or across the opening of a shower cubicle.
The handset should be directed away from the
shower control.
25 mm Minimum
Spill-over Level
Hose Retaining Ring
0
5
10
15
20
25
30
35
40
45
0
50
100
150
200
250
Fl
ow
Ra
te
(l/m
in
)
Pressure (kPa)
Mode 1
Mode 3
Mode 4
Mode 2
Nectar multi mode Showerhead
