STEP
16
STEP
15
Fit splashguards to the underside of the door.
The splashguard lip should face inside the enclosure.
-8-
STEP
17
STEP
18
Fix pivot cap onto both sides of the pivot, then knock
with rubber hammer to ensure the cap is locked in
position if necessary.
On the door side turn the adjusters through 90 to lock
the door assembly to the wall channel.
90
o
Unlocked
Locked
3mm
3mm
A
If the tray has been fitted level the gap under the
glass panel should be 3mm along its length and the
bottom track should be on the tray.
3mm
The position of the door can be
adjusted by loosening the fixing
screws 'A' and undoing the locks in the
wall channels. The whole assembly
can be moved to the correct position.
A
Tighten the screws and wall channel
locks when adjustment is complete.
1120770-T01-C
