Kohler LOMBARDINI AB598, Инструкция по установке, эксплуатации и обслуживанию

Страница: 37 / 100

17
EN
5. Compressor maintenance
An engine performance decrease, indicates that compressor may need maintenance and / or adjustment by an autho-
rized service center.
Discharge the compressed air from the tank before performing any machine maintenance.
Allow the compressor to cool before performing the maintenance operations.
Always stop engine.
WARNING:
Read the instruction manual before performing maintenance.
The following procedures must be performed when stopping the compressor for maintenance or service.
- Shut off the compressor
- Open the discharge tap.
- Allow the compressor to cool before performing the maintenance operations.
◊ 5.1 Spare parts
When servicing use only original spare parts.
Repairs should be performed only by authorized service center.
◊ 5.2 Maintenance Schedule
Operation daily weekly every 300
hours
every 300
hours
Tank condensate drain X
Check oil / fuel leaks X
Check motor oil level
(engine and pump unit)
X
Guards inspection X
Check vibrations and/or noise X
Check air leaks X
Compressor cleaning X
Verify and clean, if necessary, the engine
and pump unit air filters.
X
Check the motor coolant X
Check the belt tension X
Check the safety valve X
Change pump oil X
Change engine oil X
Replace pump unit air filter X
Replace belts X
General check by authorised
service center
x
These are the most common maintenance operations to be performed on compressor.
Carefully read manuals of the individual components (combustion engine and generator), in order to perform correct
maintenance.
EN