1226358-2A-C
2
1226358-2A-C
3
INSTALLATION
Install the mounting stud(1) into the faucet body base(2). Insert the washer (3)
under the body assembly. Insert the flexible supply hoses(4) into the sink.
From underside of the sink, place the washers(5, rubber washer is on the top)
and the nut(6) onto mounting stud. Position the faucet so that the handle is on
the right side. Tighten faucet on the sink by screwing the nut.
Attach the hoses to water supplies. The hose with "COLD" label is for cold
water.
99480T-4
Tube Spout Kitchen Faucet
KUMIN
SERVICE PARTS
**Color code must be specified when ordering
INSTALLATION CHECKOUT
Ensure that all connections are tightened and the handle is in the off position.
Open the drain. Turn on main water supply and check for leaks. Repair as
required.
Remove the aerator(7). Turn the faucet handle on. Run hot and cold water
through the spout for about one minute to remove any debris. Remove debris
from the aerator. Shut off the faucet and reinstall the aerator.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
5
6
4
1
3
2
7
1222603**
1226351**
1226347**
833438
834754
1226352
3014293
1232536
1226353
1226356
1227275
836549
1226354 1226355**
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953
