Kohler KDI-1903TCR, Руководство пользователя

Страница: 29 / 40

5
29
Fig. 5.2
50 Nm D
B
D
E
A
A
C
Fig. 5.1
Fig. 5.3
INFORMATION ABOUT REPLACEMENTS
EN
5.1 Engine oil replacement
Important
• Place engine on level surface to ensure accurate
measurement of oil level.
NOTE: Perform this operation with warm engine, to get a
better fluidity of the oil and get a full discharge of oil
and impurities contained in it.
1 - Loosen the oil filler cap A (Fig. 5.1) .
2 - Remove the oil dipstick B .
3 -
Remove the oil drain plug
D
and the gasket
E
(the oil drain plug is on both sides of the oil sump).
4 - Drain oil in an appropriate container.
(For the exhausted oil disposal, refer to
Par. 5.6 DISPOSAL
and
SCRAPPING
).
5 - Replace gasket E .
6 - Tighten the drain oil plug D (tightening torque at 3 5 Nm ).
7 - Add the type and amount of oil recommended
( Tab. 1.1
and
Tab. 1.2 )
.
8 - If the plug A is not accessible, use the oil
filler cap C .
Important
• Do not exceed the MAX level on the dipstick.
Danger
Disconnect the negative wire (-) from the battery to avoid accidental engine starting.
UM KDI 1903TCR_2504TCR _ cod. ED0053029490 -
2° ed
_rev.
01
Index