Kohler KD45V20 Скачать руководство пользователя страница 85

Страница: 85 / 108

6 Transport and storage

DANGER

Protective atmosphere against damage by oxidation inside the protective film.
Mortal danger, risk of suffocation! Will cause serious injuries or death.

Remove and store the protective film only in a well-ventilated area.

The protective film may be stored only in areas that are out of the reach of
children.

CAUTION

Incorrect waste disposal.
Environmental and health hazard.

Pay attention to national and international regulations on the disposal of waste
substances.

Dispose of all wastes in suitable containers.

Store wastes in dedicated storage places.

NOTICE

Incorrect setting down of the Diesel engine.
Engine damage.

Do not stand the Diesel engine on the oil sump.

Place the Diesel engine on the appropriate fastening pieces.

NOTICE

Incorrect storage.
Damage by oxidation.

Store the Diesel engine only in dry places.

Do not expose the Diesel engine to great fluctuations in temperature.

Remove the transport protection film only shortly before installation.

When the Diesel engine is removed:

Cover with a new protective film and observe the climatic conditions for storage.

NOTICE

Storage conditions are part of the device manufacturer.

Comply with the standard ISO 6749-1984 for transportation and storage.

Please contact the Kohler customer service if anything is unclear.

KD45V20 33521030001_4_1 en 2018-08-01

Содержание KD45V20










































































































Результаты поиска

Содержание KD45V20

Отзывы:

Похожие инструкции для KD45V20

Бренды по названию

Популярные бренды

Kohler KD45V20, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание KD45V20

Отзывы:

Похожие инструкции для KD45V20

Бренды по названию

Популярные бренды