Kohler KARING 2.0 K-77780T-0, Руководство по установке

Страница: 45 / 73

fig.#11
fig.#10
E. Install the Wax Ring
F. Position the Tank
Place the wax ring in the putty ring located on the tank.
Mark the centerline on the floor.
Align the tank over the floor flange.
Lower the tank onto the floor flange. The T-bolts should align
with the mounting slots in the base of the tank.
Carefully align the tank on the centerline.
Position the tank on the T-bolts.
CAUTION: Risk of product damage.
Do not push down on any part of the tank assembly other than the
cylinder. Damage may occur.
CAUTION: Risk of product damage.
Do not rock or lift the tank after placement. The seal created by the
wax ring may be broken, resulting in leaking.
Position the loose end of the refill tube out the outlet ring.
Outlet Ring
Press here on cylinder.
Tank
Refill Tube
Floor Flange
T-Bolts
Centerlines
Kohler Co. 45 1250881-T01-A