Kohler K-T16237, Руководство по установке

Страница: 4 / 20

2. Install the Spout
NOTICE: To avoid damage to the seal in the base of the spout, use
care when installing the spout.
NOTE: Before installing the sleeve assembly, make sure the O-ring
is positioned in the groove.
Loosen the setscrews in the sleeve.
Twist the sleeve onto the spout tube until it contacts the finished
deck.
Align the sleeve so the setscrews are offset (not facing directly
front or back).
Tighten the setscrews.
Purge the spout supply tube of debris.
Position the spout on the sleeve assembly, then carefully press
down until the spout contacts the finished deck.
Rotate the spout to align straight toward the user.
Tighten the setscrew.
Press the plug button into the back of the spout.
Setscrew
Plug Button
Sleeve
Assembly
Setscrews
Spout
Supply
Tube
O-Ring
1054538-2-D 4 Kohler Co.