8. Install the Sprayface
NOTE:
For product with brushed finishes, align the brush pattern
of the sprayfaces with the direction of the brushed pattern of the
escutcheon.
Tilt the sprayhead to expose the ribs.
Position the grooves of the sprayface over the ribs, then rotate the
loose end of the sprayface up as illustrated.
Press the sprayface into place to cover the sprayhead.
Tilt the sprayhead assembly to expose the setscrew holes.
IMPORTANT!
To avoid product damage, the setscrews must not
protrude beyond the sprayface.
Using a 5/64
″
hex wrench, turn the setscrews counterclockwise
until they are flush with the sprayface.
Repeat for the remaining sprayfaces.
Warranty
KOHLER
®
Faucet Lifetime Limited Warranty
Kohler Co. warrants its Faucets* manufactured after January 1, 1997, to
be leak and drip free during normal residential use for as long as the
original consumer purchaser owns his or her home. If the Faucet
should leak or drip during normal use, Kohler Co. will, free of charge,
mail to the purchaser the cartridge necessary to put the Faucet in good
working condition. This warranty applies only to Kohler Faucets
installed in the United States of America, Canada or Mexico (
″
North
America
″
).
Kohler Co. also warrants all other aspects of the faucet or accessories
Setscrews
Sprayface
Ribs
Sprayface
Kohler Co.
11
1207715-2-B
