4. Install the Locker Unit
IMPORTANT!
Install the locker unit with the shelf grooves angled upward. The shelves will not stay in
place if you install the locker unit upside down.
TIP:
Urethane-based adhesive will provide the best adhesion with this product.
Generously apply bath and shower construction adhesive to the back of the locker unit on the top,
bottom, and sides.
Position the locker unit into place at a slight angle.
Push the locker unit against the rough wall between the wood bracing. Press firmly and evenly
across the entire locker unit.
2x4 Blocking
Wallboard
Backing
1248926-2-C
6
Kohler Co.
