Product Information
Applicable product:
Bath with airjets and chromatherapy
K-820-GC
Fixture*:
Bathing well:
Basin area,
bottom
62-1/2
″
(158.8 cm) x 24-3/4
″
(62.9 cm)
Basin area, top
49
″
(124.5 cm) x 22
″
(55.9 cm)
Weight
400 lbs (181.4 kg)
To overflow:
Water depth
19
″
(48.3 cm)
Capacity
75 gal (284 L)
* Approximate measurements for comparison only.
Drop-in
cut-out
66-1/2
″
(168.9 cm) x 31
″
(78.7 cm)
Blower
motor:
kW
V
Hz
A
300
220-240
50/60
3
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor/control:
220-240 V, 15 A, 50/60 Hz
Notes
Install this product according to the installation guide.
NOTICE: If the blower motor and check valve are relocated,
two
access panels are required. Locate one access panel at the blower
motor/control location and the other at the control box. Locate the
blower motor and check valve together.
Floor support under bath must provide for a minimum of 78
lbs/square foot (386 kg/square meter) loading.
Splitting the deck/surround is recommended if installing into a
deck.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
NOTE:
Blower protrusion
beyond the rim.
Blower Motor/
Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
2-1/2"
(6.4 cm)
66-15/16" (170 cm)
14-1/2"
(36.8 cm)
31-1/2"
(80 cm)
33-1/2" (85.1 cm)
1-3/16" (3 cm)
19-1/16"
(48.4 cm)
17-3/8"
(44.2 cm)
22-3/16" (56.4 cm)
4" (10.1 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
1-1/2" PVC
2-1/2"
(6.4 cm)
7"
(17.8 cm)
2-5/8" (6.7 cm)
10-1/8"
(25.8 cm)
2-7/16"
(6.2 cm)
1156011-1-A
2
Kohler Co.
