-7-
1276024-T01-D
NOTE:
Before changing the filter, please make sure the cold
water valve is turned off.
NOTE:
After the filter is replaced, the corresponding button
can be reset only. If not, the filter life indicator can't be
accurate. No need to reset after the first installation.
NOTE:
Filtration performance varies depending on local
water quality.
S
te
p 3:
Installin
g F
ilte
r C
a
r
t
r
id
g
e
& R
e
p
la
c
in
g F
ilte
r
C
a
r
t
r
id
g
es
Fig.#9
9
!
!
!
Remove and discard the dustproof cap (sanitary
protective cap) from the cartridge;
Verify both O-rings are present and positioned correctly in
the grooves;
Push the filter cartridge into the filter base align the hollow
icon of the cartridge with the hollow icon on the filter base,
then turn cartridge clockwise until the hollow icon of the
cartridge were aligned the color filled icon on the filter
base, it will be fully installed. (Figure 9)
!
!
!
O
90
(
9)
Rotate 90 degree & Pull out the old filter.
90
Change new filter matched the button colour.
Aim at the dot, rotate 90 degrees to fix.
90
Fig.#10
10
!
When filters replaced
remember to push and hold the
corresponding reset button to the filter for 5 seconds until
the indicator automatically with 2 short beep, then
corresponding orange LED light turn to white. (Figure 10)
!
Please replace filter when prompted by the indicator.
!
5
(
10)
!
System Model
K-80021T-KP040-01R
K-80021T-KP050-01R
First Stage
80031T-R1-01R
80041T-R1-01R
Second Stage
80031T-R2-01R
80041T-R2-01R
Third Stage
80031T-R3-01R
80041T-R3-01R
Press RESET button
for 5 seconds to reset
RESET
5
