Kohler K-7894, Руководство по установке

Страница: 5 / 16

1015079-2-
B
5
Kohler Co.
Aerator
Valve Inlet
Coupling Nut
Supply
Tube
Supply
Stop
Ferrule
5. Supply Installation
-
If the sink is not yet installed, install it at this time.
-
Slide the coupling nuts and ferrules onto the supply tubes.
-
Carefully insert the supply tubes into the valve inlets and shut-off
valve outlets (if used) and secure with coupling nuts.
-
Carefully position the round end of the supply tube squarely to the
valve inlet and supply stop.
-
Tighten all coupling nuts.
6. Installation Checkout
-
Ensure that all coupling nuts are tight.
-
Ensure that both faucet handles are turned off (hot = clockwise close,
cold = counterclockwise close).
-
Turn on the main water supply (not the faucet), and check for leaks.
-
Remove the aerator.
-
Open both the hot and cold valves and run water through the spout
for about a minute to remove any debris.
-
Repair as required.
-
Check for leaks.
-
Remove any debris from the aerator.
-
Turn the water off, and re-install the aerator.