Kohler K-77795 Series, Руководство для владельцев жилья

Страница: 15 / 52

A. Press button to
enter front wash
D. Press button to stop all functions.
E. Press to perform
fIush full, push and
hold “ ” for 2 seconds
to enter emergency
fIush mode when power
is Off.
B. Press button to enter
rear wash
C. Light sensor area
Bidet nozzle
UV radiation range
Bidet nozzle
F. When unseated, push and hold rear or
front wash button until nozzle extension,
perform manual clean for nozzle,press “ ”
button to deactivate manual clean function.
D. 1. Standby function
Push and hold (more than 2 seconds)
“ ” button to enter standby mode, details
are shown in Page 15 “standby function” item.
2. Stop function
Press “ ” button to stop fIush, dryer,
air purification, One button sterilization
function, manual nozzle clean and UV function.
Auxiliary Keyboard Function
Wide Oscillate Clean Function
Standby Function
NOTE:
¨
Each function performance shall conform to factory setting.
¨
When use the Front wash/Rear wash mode, activate corresponding function, auto deactivate after 5 minutes.
¨
Deactivate Front wash/Rear wash/Dryer function by pressing" " button.
¨
Use " " button to flush bowl.
The Bidet is equipped with wide oscillation clean function. If you would like to use wide oscillate function, push
and hold Rear wash and Stop button about 2 seconds before activate Rear wash and Oscillate function; activate
Oscillate function.
¨
Push and Hold " " button (over 2 seconds) on side panel, enter standby mode when generate one "beep".
Auto detection and remote function deactivated at this point. Seat heating function deactivated to minimize
energy consumption.
¨
When press any button on side panel or seated, auto exit standby mode, all function recovered.
Kohler Co. 15 1295780-X5-C