Kohler K-77795 Series, Руководство для владельцев жилья

Страница: 10 / 52

Red LED blink
Remote controller battery usage and replacement
Others
Guide on Setting of the Remote Controller (cont.)
¨
Remote docking station use four AA alkaline batteries.
¨
When battery is low, docking station red LED blink and light up, indicates the replacement of battery.
NOTE:
¨
The positive and negative polarities of battery must be consistent with the mark of remote controller.
¨
Do not mix new and old batteries.
¨
Please use alkaline battery.
¨
Do not place remote at a place where it may be splashed by liquid, or immersed in liquid.
¨
Do not place remote near hand dryer, hair dryer etc. small size home appliances to avoid disturbance from
proper use.
¨
Do not apply frequent and sever external force to the key zone.
¨
After using remote, place remote back on docking station mounted on wall.
¨
Prevent from dropping in the use of remote.
¨
Anti-loss function: remote can be locked and fixed to the base by screws. Refer to the installation instructions
for detailed methods.
P - Position...nozzle clean setting
When unseated, push and hold button to activate manual nozzle clean function, nozzle extend, manual clean the
nozzle, then push and hold button or press STOP button to deactivate the function.
When there's no change on E/F/G/H/J/L/N setting for a certain period of time, press button on toilet side panel
before change next time, until one short beep is generated and night light blink 3 times.
1295780-X5-C 10 Kohler Co.