Kohler K-77780T-0, Руководство по установке

Страница: 4 / 37

Fig.#2
SPECIFICATIONS
SIMPLIFIEDDIAGRAMOFTHEUNIT
Press dryer button to
activate dryer function
Press button to
activate rear wash
Light sensing area
Press button to
activate front wash
Bumper x 2
Seat Cover (Antibacterial*)
Auxiliary Panel
Fllush button
Nozzle
Seat (Antibacterial*)
Seat Sensor Area
* Power value testing condition: dynamic pressure 0.2MPa, inlet water temp 15°C.
Flush volume
Water efficiency
grade
* Pit distance
Water pressure
Rated voltage
Rated power*
Max instantaneous power
Length of power line
Product outline dimension
Weight of product
Inlet water temp
Operation Environment
How to Use Piezoelectric Switch
NOTE: See "Homeowner's Guide" for detailed specifications of the bidet seat.
*
Antibacterial: the seat and cover contains long term inorganic anti-bacteria material which will inhibit bacteria growth on surface, this does not represent the mildew and other incidental effects.
The antibacterial rate is more than 90%. (Perform test in accordance with GB21551.2-2010 requirements. Testing lab: China household electrical appliances testing institute; electromechanical
products testing technology center of Shanghai Entry-Exit inspection and quarantine bureau.)
1. Standby mode
Hold “ ” button (over 2s) to enter standby
mode. Details refer to “Standby mode” chapter
“ Homeowner's Guide ” on page 15 .
2. Stop function
Press “ ” button to stop flushing, dryer, air
purification, one button sterilization, manual wand
clean or UV function.
4.0L
Level
III
305mm
Min water pressure 0.07MPa (dynamic pressure)
Max water pressure 0.74MPa
220V~, 50Hz
1100W
About 1600W
About 1.1m
About 705mm x 451mm x 526mm
About 46kg
1-35°C
1-40°C
Fast Press(Caution: Please don't knock hard, else the mechanical flush
switch may deform.)
* The description of water efficiency label marked on intelligent toilet: water efficiency label represents a compliance mark of the water efficiency grade etc. performance of intelligent toilet.
1303729-T01-G 4 Kohler Co.