Kohler K-77780T-0, Руководство по установке

Страница: 15 / 37

Fig.#26
Fig.#27
Remove rubber plug
Remove rubber plug
Docking station
Gasket
INSTALLATION OF REMOTE CONTROLLER HOLDER
NOTE: If the wall for installation is made of special material (such as wood board, density board and etc.), suitable
fixing methods shall be adopted. The place to install the remote controller shall not be easily splashed by water.
NOTE: The place to install the remote controller shall not be easily splashed by water.
Choose a mounting location for the remote holder that is easily accessible while sitting on the seat.
Drilling two holes with depth larger than 45mm on the wall by drill with a diameter of 6mm in accordance with the
position of screw holes on the remote control holder. Installing the expansion tube into the holes.
Placing the installation holder on the fixing hole.
Peeling off the release paper of double-sided tape at the back of holder.
Fixing the holder with screws and install it.
Installing the screw covers on the screws.
Placing the remote controller on the holder.
Installation Steps:
Public anti-loss installation
Expansion
Tube
Expansion Screw
Hook
Screw
Hook board
Remote Controller
Kohler Co. 15 1303729-T01-G