
8. Install the Door Framework
NOTE:
For the sake of clarity, not all pieces are shown in 7A, 7B, 7C and 7D.
Place the door framework between the side panels and align the flange lip and strike post lip with
the column grooves as shown in 7A and 7B above.
Push the lips of the flange and the strike post all the way into the column grooves as shown in 7C
and 7D above.
NOTE:
Do not overtighten the screws. Tighten by hand using a #2 Phillips screwdriver.
Secure the door framework to the side panels by attaching #8 x 5/8
″
flathead screws into the screw
ports of the column.
9. Install the Bushings and Plugs
If the door pivots on the right side, insert a bushing into the right side hole of the top and bottom
bridge member. If the door pivots on the left side, insert a bushing into the left hole of the top and
bottom bridge members.
Insert a plug into the opposite hole of the top and bottom bridge members.
7A
7B
Screwport
7C
7D
Bridge Member
Plug
Bushing
Bushing
Bushing
Plug
Plug
Side
Panel
Door
Framework
Bridge
Member
Bushings go on pivot side, plugs go on open
side of the door. Left side pivot is shown.
Column
Groove
Column
Groove
Flange
Lip
Strike
Post Lip
Side
Panel
No. 8 x 5/8"
Flathead Screw
1032629-2-B
8
Kohler Co.