background image

-1-

BEFORE YOU BEGIN

安装之前

© Copyright Kohler China Investment Co., Ltd. 2019

© 

版权为科勒(中国)投资有限公司所有

 2019

ZHONGSHAN KOHLER SHOWER CO., LTD.     NO13-1, XINGYE ROAD, ZHONGSHAN TORCH 

DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA     POST CODE: 528437

中山科勒卫浴有限公司

 

广东省中山市中山火炬开发区兴业路

 13-1 

 

邮编:

528437

• 

说明书中所有的资料是按最新出版的产品资料编写而成。

科勒中国有限公司保留任何时候无须通知即可改变产品特

性、包装或产品可供类型的权利。

• 

说明书包括重要的安装、清洁及保养方面的内容,

请把这

些资料交给用户阅读,保管。

• 

确保在安装淋浴房之前已经完整正确地安装了浴室和完工

墙面材料。淋浴区墙地面应做防水处理,并不得布置有电

器开关、插座。确保地面排水通畅。

• 

在进行淋浴房安装之前,请拿出、排列并确认所有的零部

件。请参考第

 2 

页上所示的分解图。

• 

对尺寸与本标准产品不同的定制淋浴房,参照本说明书进

行安装。

• 

本产品符合

 QB 2584-2007

• 

All information is based on the latest product information 

available at the time of publication. Kohler China Ltd. 

reserves the right to make changes in product 

characteristics, packaging, or availability at any time 

without notice.

• 

These instructions contain important care, cleaning, and 

warranty information-

please leave these instructions for 

the consumer.

• 

Make sure that the bath and the finished wall material are 

completely and correctly installed prior to installing your 

shower door. Prepare waterproof layer to wall and floor of 

the showering area. It is not allowed for any presence of 

electric switches and sockets. Make sure the floor drain 

runs smoothly.

• 

Before starting the door installation, lay out and identify all 

the parts. Use the exploded view illustrated on page 2 for 

reference.

• 

For the installation method of customized shower with 

different dimensions, please refer to this instructions.

• 

The product complies with QB 2584-2007.

警告:可能有人员伤害或者产品损坏的危险。

钢化玻璃不能进行切割,钻孔或硬物敲击。搬移或安装

过程中,小心确保玻璃边、角部位不受撞击,以防爆裂

伤人。

建议:

将本产品安装在科勒淋浴盆或挡水条上(需另行购买)。

如自备挡水条,建议顶面宽度尺寸大于

 80mm

重要事项:

淋浴房需要安装在平坦垂直的墙面上。墙面的垂直度

推荐在正负

 3mm/m 

以内。如果超出此范围,科勒公司将不保证

淋浴房的完美使用。

CAUTION: Risk of injury or product damage. 

Tempered glass cannot be cut, drilled or knocked by 

hard object. Make sure corner area of the glass 

refraining from knocking so as to cause personal injury 

due to broken glass.

ATTENTION:

 Please install this door on Kohler receptors or 

curbs(Not included). If the curb is not Kohler-branded, please 

note its top width should be more than 80mm.

IMPORTANT: 

The shower door requires a flat vertical 

finished wall. The squareness of the wall is recommended no 

more than 3 mm/m. KOHLER Company won't take 

responsibility of the installation quality.

24hrs

ROUGHING-IN

尺寸图

Unit: mm

单位:毫米

Do not use the enclosure for at least 24 hours.

安装后

 24 

小时内请勿使用淋浴房。

COMPONENTS 

艺廷

INSTALLATION INSTRUCTIONS

安装说明书

L SHAPE, 1DOOR 2PANELS, 10mm

L

型,两固一活,

10mm 

防爆贴膜

+

超白,竖墙材款

 K-701803T-FMSW

SKU

B

H

1000-1600

C

250-1100

1850-2200

K-701803T

1380417-T01-A

B

C

H

Содержание K-701803T-FMSW

Страница 1: ... the floor drain runs smoothly Before starting the door installation lay out and identify all the parts Use the exploded view illustrated on page 2 for reference For the installation method of customized shower with different dimensions please refer to this instructions The product complies with QB 2584 2007 警告 可能有人员伤害或者产品损坏的危险 钢化玻璃不能进行切割 钻孔或硬物敲击 搬移或安装 过程中 小心确保玻璃边 角部位不受撞击 以防爆裂 伤人 建议 将本产品安装在科勒淋浴盆或挡...

Страница 2: ... Seal Bottom Door 固玻底下装饰胶条 Components Handle 艺廷拉手 Door Glass Components 门玻 Magnetic Seal 磁条 Side Panel Glass L Shape Components 侧固定玻璃 Cover Wall Jamb 墙立柱装饰盖 Wall Jamb L R Insert Glass 夹固玻墙立柱 L R End Cover Solid Glass Wall Jamb 夹固玻墙立柱端盖 X2 X2 X2 X4 X4 X1 X1 X1 X1 X1 X1 X1 Side Panel Glass Clamp Assy 侧固玻拉杆玻璃夹组件 Components Handle 艺廷拉手 Briquetting 下导轨固定件 Cover Wall Jamb 墙立柱装饰盖 Cover Briquetting Decora...

Страница 3: ...调节 Be careful of the orientation of the taper ring 注意锥形孔圈方向 Taper ring 锥形孔圈 Observation hole 观察孔 Set screws 紧定螺钉 Rubber washer 焊片胶垫 1 Insert the insert seal between the inner side of the panel glasses and the jambs 2 Loosen the lock screws on the inside of the hinge Insert the adjusting mechanism into the opening of the glasses make sure that the plastic cover and the plastic washers on both sides...

Страница 4: ...he weather bar IMPORTANT Install the hinge cover before the side weather bar 1 装好磁条 挡水胶条 重要 在安装侧挡水胶条前 先扣好铰链盖板 Cut the bubble seal according to the actual height of the glass to avoid the installation positions of the hinges 泡泡胶条需根据实际玻璃高度剪断 用以避开铰 链安装位置 Install the waterproof part before the side weather bar 防水密封件在安装侧挡水胶条前须装好 Install the bottom weather bar assembly 门底挡水胶条组件安装 1 Install decorative co...

Отзывы: