Kohler K-6502, Руководство по установке

Страница: 6 / 24

4. Installing Square Handles
Close the valves (hot = clockwise, cold = counterclockwise).
Position a gasket over each valve body.
Thread an escutcheon onto each valve body.
Fit a spline adapter halfway onto each valve stem.
Partially install each skirt assembly onto a spline adapter.
Check the skirt alignment. If further alignment is needed,
reposition the spline adapter until the skirt alignment is correct.
Fasten each skirt to a valve with a screw.
Snap an inset into each inset holder.
Thread an outer shell onto each skirt.
Escutcheon
Gasket
Valve Body
Outer Shell
Spline Adapter
Inset
Inset Holder
Screw
Skirt
105601-2-AB 6 Kohler Co.