Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of personal injury or product damage.
Handle
with care. Vitreous china can break or chip if the product is
handled carelessly.
DANGER: Risk of electrical shock.
Connect to a properly
grounded, grounding-type receptacle, protected by a
Ground-Fault Circuit-Interrupter (GFCI).
A dedicated 120 VAC, 15 A, 60 Hz circuit (protected by a Class A
GFCI) is required for installation.
NOTICE:
The Canadian Electric Code requires receptacles installed
in bathrooms to be located at least 1 meter from a bathtub or
shower if practical, but in no case less than 500 mm. If the
installation is in Canada, install this unit in accordance with the
Canadian Electrical Code, Part 1.
Observe all local plumbing and building codes.
CAUTION: Risk of product or property damage.
Do not use
rigid conduit to install this toilet. Rigid conduit may put
excessive stress on the toilet, which can cause damage to the
toilet tank or the installation site.
10" Adjustable
Wrench
Supply
Shut-Off
Valve
Tape
Measure
Tubing Cutter
Safety
Glasses
Plus:
• 5/16" T-Bolts w/ Nuts and Washers
• Putty Knife
• Screwdriver
• Electrical Tools and Supplies
• Hacksaw
• Level
• Sponge
• Pipe Wrench
• Metal File
• Liquid-Tight Conduit
Wax Seal
1021800-2-B
2
Kohler Co.
