1. Prepare the Site
NOTE:
Use thread sealant on all threaded connections.
Determine the installation location of the spout and install the
support framing as required.
Install a bath elbow and adapter (if used) on 1/2
″
copper tubing
or a 1/2
″
pipe of proper length and connect to the bath outlet of
the valve.
Install a temporary 1/2
″
nipple to the bath elbow to extend at
least 2
″
(5.1 cm) beyond the finished wall.
Securely fasten the bath members to the framing.
Turn on the water and check for leaks. Repair as required.
Shower
Outlet
Support
Framing
Spout
Location
1/2" (1.3 cm)
Adapter
1/2"
Piping
Bath Ell
Temporary
Nipple
Kohler Co.
3
113281-2-AB
