1. Install Handles
Close the valves (hot = clockwise, cold = counterclockwise).
Press the spline adapter about halfway onto the valve stem.
Partially install the handle to the spline adapter, and check the
alignment of the handle.
For further alignment, remove the handle, and reposition the
spline adapter on the valve stem until the handle alignment is
correct.
For models with color-coded button caps: Secure the red (hot) or
blue (cold) button cap and handle with the screw provided.
For models with finish-matched button caps: Secure the handles
with the screws provided. Snap a cap into the top of each handle.
Plug Button
Screw
Spline Adapter
Valve Stem
Screw
Red or Blue
Button Cap
Handle
Styles
Kohler Co.
3
1
1
4559-2-AB
