1. Install the Supply and Stop
Apply thread sealant to the male threads of the short pipe, long
pipe, and right-angle stop.
Assemble the short pipe, elbow, long pipe, and right-angle stop to
the foot control as shown. Tighten securely.
Install the riser tube to the spout, and tighten securely.
Carefully bend the riser tube to fit onto the right-angle stop, and
tighten securely.
Open the water supplies to the foot control. Use the volume
control key (provided) to open the right-angle stop. Run water
through the spout for one minute, moving the foot control
through its full range of operation.
Check for leaks and repair as needed.
Right-Angle Stop
Long Pipe
Short Pipe
Foot Control
Elbow
Riser Tube
To Spout
Riser
Assembly
Volume
Control Key
Kohler Co.
3
105332-2-AB
