Product Information
Drop-in bath whirlpool
K-1246
shown
Fixture*:
basin area
top area
weight
Bathing
well
44
″
(111.8 cm) x
31
″
(78.7 cm)
50
″
(127 cm) x
34
″
(86.4 cm)
110 lbs
(49.9 kg)
water depth
capacity
To
overflow
15
″
(38.1 cm)
69 gal (261.2 L)
* Approximate measurements for comparison only.
Pump:
Hp
V
Hz
A
1-speed
1.25
120
60
7.5
Included Component:
Cutout template
113926-7
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under the whirlpool must provide for a minimum of
1200 lbs (544.3 kg) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
This fixture conforms to CSA B45 and ANSI Standard Z124.1. All
dimensions are nominal.
17"
(43.2 cm)
21"
(53.3 cm)
16-1/16"
(40.8 cm)
3-1/2"
(8.9 cm)
1-1/2"
(3.8 cm)
12-5/16" (31.3 cm)
5-3/8" (13.7 cm)
2-7/8" (7.3 cm)
60" (152.4 cm)
1-3/16" (3 cm)
3" (7.6 cm)
42" (106.7 cm)
1-1/2" OD
Drop-In Rim Detail
Pump/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H Min
(Typical)
Recommended faucet area.
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
1013768-1-B
2
Kohler Co.
