Product Information
Applicable product:
Drop-in rim style, custom pump
K-1226-CD
Fixture*:
Bathing well:
Basin area, bottom
37
″
(94 cm) x 26
″
(66 cm)
Basin area, top
54
″
(137.2 cm) x 37
″
(94 cm)
Weight
89 lbs (40.4 kg)
To overflow:
Water depth
14-1/4
″
(36.2 cm)
Capacity
69 gal (261.2 L)
* Approximate measurements for comparison only.
Drop-in cutout
58-1/2
″
(148.6 cm) x 40-1/2
″
(102.9 cm)
Pump:
V
Hz
A
1-speed
120
60
7.5
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
39 lbs/square foot (193 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
NOTICE:
The bath is designed for bathing only. It is not designed
to be used in a three wall alcove with an overhead shower.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
11-13/16"
(30 cm)
Pump/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H
1-1/16" (2.7 cm)
18-5/8"
(47.3 cm)
5-7/16" (13.8 cm)
1-1/2" OD
42" (106.7 cm)
3-1/8" (7.9 cm)
30" (76.2 cm)
60" (152.4 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1"
(2.5 cm)
No change in measurements if connected
with drain illustrated. (K-7161-AF)
1013727-1-B
2
Kohler Co.
