Recommended Faucet Location
1-1/2"
Bath Drain
66" (1676 mm)
18"
(457 mm)
3-1/2"
(89 mm)
35-7/8" (911 mm)
1"
(25 mm)
2-7/8"
(73 mm)
3"
(76 mm)
1-11/16"
(43 mm)
8-11/16"
(221 mm)
20"
(508 mm)
18-1/2"
(470 mm)
Pump/Control Access
20" (508 mm) W x 15" (381 mm) H
No change in measurements if connected
with drain illustrated. (K-7161-AF)
1-1/2"
(38 mm)
Lumbar
Angle 38°
1-1/2"
(38 mm)
Drop-in Rim
Detail
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 Hz
Pump:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-in
Installation:
End
Drain location:
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
48" x 24" (1219 mm x 610 mm)
Basin area, bottom:
59" x 30" (1499 mm x 762 mm)
Basin area, top:
110 lbs (49.9 kg)
Weight:
48 lbs/ft² (234.4 kg/m²)
Minimum floor load:
14" (356 mm)
Water depth:
67 gal (253.6 L)
Water capacity:
Drop-in, 64" x 34" (1626 mm x 864 mm)
Cutout:
Pump: 120 V, 7.5 A, 60 Hz
Electrical component
rating:
Single
Pump speed:
1-15/16" (49 mm)
Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
10-31-2019 06:06 - US
Mariposa
®
66" drop-in whirlpool
K-1224
