NOTE:
1. For the sake of your safety, please turn off
the electricity before installation, dismantling
or cleaning.
2. The installation is suggested to be executed
by certified electrician, and the ground wires
Should be properly connected.
1.
2.
PREPARE THE SITE
PREPARE THE SITE
-2-
Mark
L
means hot wires.
Mark
N
means neutral wires.
Mark
means ground wires.
L
N
1.
2.
,
1. Remove the mounting plate from the
backplate of the fixture. Securely tighten the
mounting plate to outlet box with the
mounting screws. (If there is no outlet box,
drill a proper hole on the wall, insert wall
plugs into it and then tighten the mounting
plate on the wall.)
2.
onnect the electrical wires with the
wires of the fixture on the wire holder. See
Figure 1 and below.
Remove the four screws of the outlet box,
than c
INSTALLATION
Glass Dlffuser
Mounting Plate
Wall Plug
Screw
Wire Holder
Outlet Box
Outlet Box Cover
Backplate
Socket Cup
Rubber Cup
Fig #1
1
1115671-T01-A
