Product Information
Applicable product:
Drop-in rim style with heater
K-1111-H2
Fixture*:
Bathing well:
Basin area, bottom
45
″
(114.3 cm) x 43
″
(109.2 cm)
Basin area, top
57
″
(144.8 cm) x 57
″
(144.8 cm)
Weight
300 lbs (136.08 kg)
To overflow:
Water depth
19-1/2
″
(49.5 cm)
Capacity
170 gal (643.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
68
″
(172.7 cm) x 68
″
(172.7 cm)
Pump: variable
V
Hz
A
Heater: 1.5 kw
220/240
50/60
11
Minimum access panel
pump/control (required):
34
″
(86.4 cm) W x
15
″
(38.1 cm) H
Required accessory:
Metal finish trim kit
K-9696
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
208-240 V, 20 A, 50/60 Hz
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 53
lbs/square foot (256 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
If installing a rim-mount faucet, make sure there is no interference
with drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2-1/2"
(6.4 cm)
6-1/2" (16.5 cm)
3-1/2"
(8.9 cm)
3" (7.6 cm)
11/16" (1.7 cm)
22-1/2"
(57.2 cm)
2" OD
69-1/4" (175.9 cm)
69-1/4" (175.9 cm)
24"
(61 cm)
13-1/2" (34.3 cm)
17-3/8"
(44.1 cm)
Recommended faucet area.
40"
(101.6 cm)
4"
(10.2 cm)
No change in measurements with drain shown.
(K-7167-AF or K-7167M-AF)
K-1111-H2
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min
1042951-1-B
2
Kohler Co.
