1230991-2A-B
2
1230991-2A-B
3
INSTALLATION
How To Install The Faucet
Install mounting stud(1) into the faucet body base(2). Tighten it by hand.
Slide the washer(3) over the flexible hoses and mounting stud, and into
the groove at the bottom of the faucet body.
Insert the flexible hoses(4) into the sink hole. Position the faucet. From
underside of the sink, place the bracket(5, Rubber washer is on the top)
on to the mounting stud(1), and secure the faucet with the nut(6).
Attach the hoses to water supplies. When facing front of faucet, the left
hose connects to hot water, the right hose with ‘COLD’ label connects to
cold water.
INSTALLATION CHECKOUT
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
Ensure that all coupling nuts are tight.
Ensure that the lever handle is in the off position.
Turn on the main water supply and drain, and check for leaks. Repair as
needed.
Remove the aerator(7). Run hot and cold water through faucet for about
one minute to remove any debris. Check for leaks. Repair as needed.
Remove any debris from the aerator. Shut off the faucet. Reinstall the
aerator.
16084T-B4
Single Lever Kitchen Faucet
JULY
SERVICE PARTS
**Color code must be specified when ordering
7
3
1
5
6
2
4
3010213
1110392**
834791**
833438
3008523
834793
834754
836664
871310
865175**
837180
837180
3005421
880086
1031237**
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953