background image

INSTALLATION 

INSTRUCTIONS

Single-lever basin mixer

 We recommend that this product is installed by a qualified professional contractor. 

 Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make

 

   sure this product is the correct model and you have all the parts required for installation and using. 

 Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the taps. 

 Turn off water supply before commencing work, this should be done at the isolating valves of inlet feeds if fitted or main stopcock. 

 Please read these instructions carefully and keep it for future reference. 

Maintainance

We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula 
too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and dried with a soft cloth. 

Important

A

1 - 2

Cleaning

Before use: Unscrew the Aerator and allow the water to run freely for 5 minutes. Then screw the filter back in place. 

Periodically: Unscrew the Aerator and remove. Rinse it with running water until any loose debris is cleared. Then replace the Aerator
and tighten.

Aerator

Reviews: