5. Install the water pipe to the connecting pipe at the side of
the tank for water supply.
NOTE:
1. Ensure inlet valves of frame should be shut down.
2.
It is recommended that a temporary rubber or plastic
hose is attached to the stop valve, and the water supply
line should be flushed clean of dirt and debris.
5.
4. Connect the drainage pipe to the drainage hole as shown.
4.
3.
NOTE:
Ensure the tank to remain level.
3.
ConnectingPipe
WaterPipe
连接管
自来水编织管
Drainage Hole
排污口
Drainage Pipe
排污管
将水箱放置到合适位置，对准固定架上的螺丝孔和地面上
的两个膨胀螺钉，如图
A
用内六角扳手把六角长螺丝拧紧。
注意要保持水箱架的水平。
如图
B
用扳手拧紧可调支架上的膨胀螺钉的螺母、弹性垫
片和垫片。
注：
1.
确保水箱内部进水角阀为关闭状态。
2
.建议在连接供水时
,
在角阀上连接一个临时橡皮或塑料软
管，冲洗供水管道，确保水干净，管道内无沙石、垢污等。
Spanner
Adjustable Bracket
Hex Pan
Tighten
Loosen
Hexagonal Screw
Level
B
A
水平尺
六角长螺丝
紧
松
内六角扳手
扳手
可调支架
Put the frame to the desired location, fixation of the
screw holes on the ground and the expansion of the
two Bulge Screw, Tighten the hexagonal long screw
with hex pan as shown in Fig. A. Please ensure the
frame remains level.
Tighten the screw of adjustable brackets with hex
pan as shown in Fig. B.
-4-
1104563-T01-C
