4
112363–2–
AA
(0793)
Kohler Co., Kohler, WI
SECURE TOILET
Assemble bolt cap bases, washers, and nuts on exposed
T-bolts.
CAUTION: Risk of personal injury or product
damage. Over-tightening may cause breakage or
chipping.
Hand-tighten nuts, then tighten an additional 1/2-turn with
wrench. If T-bolts extend more than 1/4” from top of nut,
cut off excess with a hacksaw and file cut edges. Wipe
away any residue. Install bolt caps.
Fig. #7
Bolt Cap Base
Washer
Nut
Bolt Cap
TO INSTALL NEW TANK
Unscrew the pushbutton and remove the tank lid.
Remove bags located in the tank. Assemble tank gasket
into place and lower the tank onto the base, carefully
aligning the holes on tank and base.
Insert rubber washers, washers, and screws inside the
tank. Make sure the tank screws extend through the holes
in the toilet base.
Assemble the brass washers and nuts to the screws from
uinder the tank.
CAUTION: Risk of personal injury or product
damage. Overtightening may cause breakage or
chipping.
Fig. #8
Push Button
Tank Lid
Tank Gasket
Screw
Washer
Rubber
Washer
Nut
INSTALL SEAT
Place rubber washers on the seat hinges and position in
holes located on toilet base. Tighten nylon nuts onto seat
hinges extending through bottom of bowl.
