-7-
A
B
3. Drill four holes with diameter of 12mm and depth of 80mm
with churn drilling as shown, and fill in the holes with
expanding bolt cap and tighten the screw.
3.
12mm
80mm
4. Tighten the hexagonal long screw with medium Allen key
as shown in illustration A.
Tighten the screw of adjustable brackets with medium
Allen key as shown in illustration B, and tighten the long
screw with spanner.
NOTE: Ensure the tank to remain level.
4.
A
B
Hexagonal Screw
Loosen
Tighten
Level
Medinm Allen Key
Adjustable Bracket
Spanner
Screw
Screw
Screw
Expanding Bolt Cap
Expanding Bolt Cap
Washer
Washer
B. Floor Discharge Installation Method
B.
1. Three discharge pipe installation methods based on actual
situation: A, B, C, adjust position by screw driver. Snap
discharge pipe lower end into discharge port.
1.
A
B
C
B
C
A
Discharge
Elbow
Discharge
Elbow
Discharge
Elbow
Water Tank
Bracket
Water Tank
Bracket
Water Tank
Bracket
Drain outlet
90mm, welding
90mm
Drain outlet
110mm
110mm
Drain outlet
110mm, welding
110mm
1402749-T01-A
