1310239-A02-A 10/01/2017
-6-
CONTACT AND WARRANTY INFORMATION
NEW ZEALAND
KOHLER NZ LTD
Free Ph: 0800 100 382
Free Fax: 0800 664 488
www.englefield.co.nz
AUSTRALIA
KOHLER CO.
Free Ph: 1 800 ENGLEFIELD
(1 800 364 533)
www.englefield.com
For spare parts and warranty information, please visit our website.
SEALANT APPLICATION STEPS
SEALANT APPLICATION
Ensure all joints are clean and
dry before applying sealant.
(b)
Hold the tube at 45° angle & push
(c) The surface of the sealant can
be smoothed (before surface dries)
a small quantity of water with one
drop of washing liquid added.
(d) Excess sealant should be
removed immediately with a
damp cloth.
IMPORTANT
SIKASIL NG SEALANT SHOULD BE
APPLIED TO ALL OUTSIDE JOINTS.
DO NOT SEAL FROM INSIDE.
CAUTION
AVOID CONTACT WITH SKIN, EYES &
MOUTH. AVOID BREATHING VAPOUR.
IF IN EYES, IMMEDIATELY FLUSH WITH
WATER. IF IRRITATION PERSISTS, SEEK
MEDICAL ATTENTION.
KEEP OUT OF REACH OF CHILDREN
2a.
Seal full height of the joint
between the Walls and the
Wall Retainers.
(a) Cut tip of silicone tube nozzle
at
45°
angle.
1.
(e)
Allow the silicone 24 hours to
cure before using the enclosure.
6mm
45°
For sealant application, follow
steps (a) to (e) detailed below.
b.
Seal joint between the Door
Sill and the shower tray.
To a height of 100mm, seal
joints between Door Frame
& Wall Retainer.
c.
IMPORTANT
ALLOW 24 HOURS FOR SEALANT AND
ADHESIVE TO CURE BEFORE USING THE
SHOWER.
24hrs